AMUMU BOUNTIFUL™ Acoustic Guitar Contact Microphone Pickup System
$99.00
$129.00
You Save: $30.00 (23%)
This product was viewed 12 times within last hour
Short description
The BOUNTIFUL™ Acoustic Guitar Pickup is a 3-head contact microphone pickup system installed on the bridge plate of the acoustic guitar. It’s a transducer-only system without battery and onboard electronics required. It’s passive but with high impedance output, it can drive most amplifiers and PA systems directly without a preamp.Real time 9 visitor right now!
Hurry Up! Left in stock
Order in the next to get it by Fri, Aug 21, 2020
24/7 Support
Use promocode "NC10OFF" to get 10% discount!
Free Shipping
The BOUNTIFUL™ Acoustic Guitar Pickup is a 3-head contact microphone pickup system installed on the bridge plate of the acoustic guitar.
It features super balanced and flat sound transmission with rich warm woody tone. It’s a transducer-only system without battery and onboard electronics required. It’s passive but with high impedance output, it can drive most amplifiers and PA systems directly without a preamp. But if you want more controls of the frequency, you can use the AMUMU Glorifier DI preamp.
The contact microphone, made of a thin piezoelectric ceramic round glued to a thin brass disc, also known as a piezo microphone, is a form of microphone that senses the audio vibrations through contact with the bridge plate on the soundboard of acoustic guitars.
The BOUNTIFUL™ Pickup system senses the audio vibrations through contact with acoustic guitar and transmits a significant portion of the soundboard ( bridge plate) because they are not as close to the strings as an under-saddle pickup, each of the 3 transducers is designed to pick up a specific range of frequency which is known as Treble, Mid, and Bass.
The BOUNTIFUL™ Pickup system is designed to generate the pure and uncoloured sound of the acoustic guitar, it’s totally different from those “self-adhesive” piezo pickups on the market which are attached by double-sided tapes on the external of the guitar and also sound with too much treble.
FEATURES
-
Passive, High Impedance Contact Microphone (Piezo Microphone), High Output - No Battery Required.
-
3 hand-wired transducers with 1/4” end-pin jack for Steel String Guitars - No Soldering Required
-
Transmit the Pure, Uncolored, Warm woody sound of the acoustic guitar
-
Senses audio vibrations through contact with guitar soundboard and Completely insensitive to air vibrations
-
Come with a detailed step-by-step installation manual and accessories pack.
SPECIFICATIONS
| Transducer |
Contact Microphone
|
|
Transducer Numbers
|
3 heads wired in one output
|
|
Output
|
1/4” female end-pin jack |
AMUMU SP60 Passive Humbucking Soundhole Pickup for Acoust...
- Passive Humbucker with a ceramic magnet
- Natural and warm sound with wide dynamic range
- Pole Pieces adjustable to obtain the optimum balance and tone
- Volume adjustable and high impedance passive design, no battery required
- Suitable for steel-string guitars, soundhole diameter from 3.54" to 4.33" （90mm to 110mm)
AMUMU NEO-SP30 Passive Neodymium Magnetic Soundhole Picku...
- Built with Customized Rare Earth Neodymium Magnet and Single Coil with Handwound oxygen-free copper
- Solid beech wood housing for better transmission of acoustic vibrations
- Super string balance and Pure acoustic clarity, High impedance passive design, no battery required
- Quick Installation and Storage by a Pluggable Instrument Cable with 1/8" and 1/4" jacks, no drilling required
- Fit for steel-string acoustic guitars with 3.82" to 4.33" diameter sound hole
