AMUMU SBT-12 Trans-HD(TM) SoundBoard Transducer Pickup for Acoustic Guitar Bass Ukulele Violin Cajon
This product was viewed 1 times within last hour
Built-in Trans-HD(TM) Technology for high-definition acoustic transduction.
Soundboard transducer produces a natural, warm and transparent tone.
High output, no preamp or battery required.
Easy to install with customized None-Surface-Damage adhesive included.
Suitable for most acoustic instruments: guitar, bass, ukulele, banjo, violin, mandolin, cajon, Harp.
Real time 9 visitor right now!
Order in the next to get it by Sun, Jan 24, 2021
Use promocode "NC10OFF" to get 10% discount!
Amumu SBT-12 soundboard transducer is a super affordable but powerful pickup for all musicians to amplify his/her acoustic instruments like guitar, bass, ukulele, banjo, violin, mandolin, cajon, Harp etc. It's easy to install and use, just stick the pickup on the surface of your instrument and connect to your amplifier or PA system, then start to Rock. There are two methods to fix the output jack, one is to hang on the strap-pin but you might not be able to use the strap at the same time, the other is to stick onto your instrument with the cable-tie and saddle-mount which are all included in the package.
|Double-Sided Adhesive Pads
||For holding the pickup
||Fasten the female jack to the saddle-mount
||Fasten the female jack to your instrument
||Prevent the cable from banging around on the guitar
||Acoustic instruments: guitar, bass, ukulele, banjo, violin, mandolin, cajon, harp.
HOW TO USE
Remove the cover of the adhesive on the bottom of the pickup.
Stick the pickup onto the soundboard of your instrument.
Fasten the female jack to your instrument with the Strap-Button Hole or the included saddle-mount and cable-tie. Put the cable-tie through the saddle-mount together with the female jack holder's hole, then tighten the cable tie. Remove the cover of the saddle-mount, and then stick it to a suitable location.
Fix the cable with the small cable holders (Included) anywhere you like to prevent the cable from banging around.
Connect your instrument cable to the 1/4'' female jack and your PA/Amplifier.
Select page content in the Theme Settings / Checkout Popup / Agreement checkbox popup page