Loader
Clear AllClose
Your cart is currently empty.
Subtotal
$0.00

AMUMU NEO-SP30 Passive Neodymium Magnetic Soundhole Pickup for Acoustic Guitar

$39.99
$59.99 You Save: $20.00 (33%)
This product was viewed 5 times within last hour

Short description

★ FITS in soundholes from 3.88” (98.5 mm) to 3.94” (100mm) diameter.

★ HIGH impedance passive design, no battery required.

★ BUILT with Customized Rare Earth Neodymium Magnet and Single Coil with Handwound Oxygen-Free Copper.

★ SOLID Beech Wood Housing for better transmission of Acoustic Vibrations with Super String Balance and Pure Acoustic Clarity.

★ CAME with Studio Grade Lossless Transmission Audio Cable.

★ QUICK Installation and Storage, no drilling required, harmless for guitars.

Real time 4 visitor right now!
Hurry Up! Left in stock
Order in the next to get it by Sat, May 04, 2024

Availability: In stock

Collection: Pickups

Sku: SP30

Barcode: 604776472018

  • To get a clear and bright acoustic sound, we use the single coil with hand-wound oxygen-free copper.
  • To get the best string balance and dynamic frequency, we customized a rare earth neodymium magnet.
  • To get better transmission of acoustic vibrations, we use solid wood housing.
  • To get better transmission, we customized a lossless audio cable with almost 99% transmission of the original signal.
  • To let you focus more on your play, no need to worry about the installation and storage of the pickup, SP30 uses a 10 feet instrument cable to connect the pickup and the acoustic guitar amplifiers/audio interface/mixer with the 1/8" and 1/4" jacks.
  • No drilling hole, no battery required, fast installation, just plug and play.

SPECIFICATIONS

Pickup Theory

Cutting Magnetic Lines 

Pickup Type

Single Coil Passive

Housing

Solid Beech Wood

Connection Method

Customized 10 feet (3m) instrument cable with 3.5mm and 6.35mm jacks

Applicable Soundhole Diameters

3.88" to 3.94" (98.5~100mm)


IMPORTANT NOTES:
  1. This is a magnetic pickup only work with steel-string acoustic guitars. It does NOT work with Nylon strings.
  2. Fits in soundholes from 3.88” (98.5 mm) to 3.94” (100mm) diameter. 
  3. DOES not work with 3/4-size guitars like Taylor Baby, Little Martin series whose soundhole diameters are usually 3.5".
  4. This is a passive pickup without battery-powered, it only works with guitar amplifiers with a built-in preamp.
  5. The single-coil pickup by its nature is susceptible to 50 – 60Hz hum. To minimize hum, keep the pickup away from fluorescence lights, dimmer packs, computer monitors and transformers and do not forward the soundhole to the amplifiers.

 

INSTALLATION

  • Take out the pickup and orient the 3.5mm jack side to the guitar bridge.

  • Slip the pickup into the soundhole from the high E string side.

  • Clip both sides of the pickup to the edge of the panel.

  • Push the pickup to the end of the fingerboard as closely as possible.

  • Connect the 1/8" jack of the cable with the pickup.

  • Connect the 1/4" jack of the cable with the acoustic guitar amplifiers/audio interface/mixer and you are ready to rock.

  •  

    WHAT'S IN THE BOX

  • 1x Soundhole Pickup

  • 1x 10 feet customized audio cable

  • 1x Spare Rubber Foam Set

  • 3x Cable Holders

  • 1x Owner's Manual

  • Guitar Strap Manuals Download

    Guitar Strap Manual (English)

     

    Pedals & Effects Manuals Download

    HOT SUMMER (English)
    POWER LIFTER (English)
    GLORIFIER (English)

    Pickups Manuals Download

    SP30 (English)
    SP60 (English)
    BOUNTIFUL (English)
    SBT10 (English)